Choose your automation

Are you an installer?

> Screen automation catalogue (pdf)

> Handbooks – Instruction manuals (Website)

More about rolling shutters

The automation of a shutter is obtained by simply inserting the motor, known as tubular due to its form, inside the tube around which the shutter is wound.
Control can be from the immediate vicinity, with a simple wall-mounted control, or via radio with a portable radio control.

The motor is powered by 230 V current. The motor moves reliably and precisely and is available with an emergency manoeuvre which can be used during black-outs to action the rolling shutter.

Automating a pre-existing rolling shutter is easy, convenient and fast thanks to the possibility of installing an automation system via radio with a control unit built in the tubular motor.

This solution avoids the cost and burden of masonry or the installation of unsightly cable ducts for routing control cables.

Automated rolling shutters avoid any effort for opening/closing, and guarantee perfect closure of the home in your absence.

Can all rolling shutters be automated? The motors are suitable for virtually all types of shutter, traditional or integral, i.e. in the case of a shutter integrated with the window, for large openings and also very narrow openings. A wide range of alternatives are available to create systems from simple, economic versions to more advanced home management versions.

Can the shutter invert movement in the presence of objects on the windowsill?

To guarantee increased safety, the tubular motor protects itself, the shutter and any other objects left inadvertently on the windowsill or edge of the window.

Due to the exclusive obstacle detection technology, the control unit stops the shutter and activates a brief inversion of movement, thus enabling removal of the obstacle and repetition of the movement command without damage.

Does the shutter block in presence of friction? Continuous monitoring of force during movement guarantees reliable and precise movement even in the event of ice, rust or similar obstructions and avoids accidental inversions.

What is the difference between an automation with cable control and one with radio control?

In a wired system, via cables, the control is connected to the tubular motor by means of electric cables that transmit the commands to the motor, and the control unit can be built into the motor or concealed in the vicinity.

On radio systems, the controls are transmitted via radio waves, there are no electric cables between the motor and control. The control is mobile and therefore the user can operate the shutters also from another room. Installation of this type of system is quicker and avoids the need for building work.

Find your installer

Download brochure

Nice Installation

Nice advantages

For expert users: find the tubular motor to meet your needs!
The information you need to choose the right type of automation includes: the weight of the shutter, obtained by multiplying the surface area in square metres by the weight per square metre of the material used (shutters are available commercially in various materials, such as PVC, wood, aluminuim, ...), and the diameter of the shutter roller.

For further information and to find the tubular motor that best suits your needs, consult the selection guide.

With just a click, total control!
With a Nice remote control you can control the whole range of automations for gates, garages, awnings and rolling shutters, alarm systems as well as irrigation and lighting systems and electrical loads; each single automation or groups of automations (the rolling shutter of the living room; all the rolling shutters of the first floor; rolling shutters and awnings of the southern side; ...)

Comfort and energy saving thanks to the most complete range of climatic sensors
The Nemo series of climatic sensors, reliable and precise, detect the weather conditions and manage awning movement in complete autonomy according to the detected weather and environmental conditions.

Tailor-made solutions to satisfy all installation needs: wireless climate sensors Sun and Wind-Sun with integrated photovoltaic cells and solar powered, Wind-Sun-Rain and Sun-Rain radio sensors, resistant also to humidity to avoid inadvertent activation and guarantee optimal movement management.

Nice will take care of it - what could be more convenient?

Security combines with automation: NiceHome System
The NiceHome System combines Nice control devices simplicity and completeness with the professionalism of the alarm systems the group companies have developed according to their 30-year experience.

Apart from the alarm systems, the user can directly manage up to 18 controls for automation, illumination and electrical loads. Everything with a 100% wireless solution: maximum safety with maximum ease!

The invisible touch: recessed remote control
The Tag system, disappearing inside standard wall mounted plates and suitable to confined spaces, are ideal for restorations and upgrades of existing systems to control home automations, lighting points and all loads up to 500 W not directly accessible from cable controls.

All without the need to replace the existing system or involve building work!

Simpler and quicker installation with the Nice NRC radio technology!
The Nice Radio Connection system, uses transmission via radio to simplify installation, programming and the use of all automations.

This solution avoids the costs and time-consuming building work, and the application of unsightly ducting for the routing of control cables, to make for much simpler and economic installation of all automations in new or renovated buildings.

> Selection guide (pdf)

> NiceWay (pdf)

> Nemo (pdf)

> NiceHome Systems (pdf)

> Nice Tag (pdf)