Nice

Search form

Nice
Nice

SMXI

Installation and programming video

How to programme the Nice SMXI receiver

This video provides instructions on how to memorise a Nice transmitter in the SMXI receiver and totally delete the receiver memory.

This procedure is valid for Era Inti, Era One, Era Flor, Flor and Very VR series transmitters.

FAQ

Which transmitters can I memorise in the SMXI receiver?

The receiver can memorise Nice transmitters with FloR encoding.

How many transmitters can I memorise in the SMXI receiver?

A maximum of 256 transmitters can be memorised in the receiver.

How can I memorise a transmitter in the SMXI receiver?

There are two ways to memorise a transmitter in the receiver.

  • Method 1: using this method, you can memorise all the keys of the transmitter in the receiver in a single operation. Each key of the transmitter is automatically associated with the corresponding output of the receiver; in particular key 1 activates output 1, key 2 activates output 2, and so on.
  • Method 2: Using this method, you can memorise one single key of the transmitter in the receiver and choose with which receiver output it will be associated.

To memorise the transmitter in the receiver following the step-step procedure or Method 2, watch the video, or proceed as follows:

  • Press the key of the receiver once and check that the corresponding red LED starts flashing.
  • Press and hold the key of the transmitter you want to associate with the receiver until the LED on the receiver emits three long flashes to show that memorisation has taken place, then release.
  • Wait for the red LED on the receiver to stop flashing.

How can I delete a single transmitter from the memory of the SMXI receiver?

You cannot delete a single transmitter from the memory of the receiver. With the SMXI receiver, only total deletion of the receiver memory is possible, removing all associated transmitters.

How can I totally delete the memory of the SMXI receiver?

To totally delete the memory of the receiver, follow the procedure shown in the video, or proceed as follows, respecting the sequence:

  • Press and hold the key of the receiver.
  • Wait until the corresponding LED comes on steadily, goes off, then flashes 3 times.
    Release the key of the receiver to coincide exactly with the third flash.
  • The LED starts flashing very quickly to end with 5 slow flashes.

All transmitters associated with the receiver have been deleted.

Download