Nice
Home > Support > Download

Download

Search

Show results in:

32 Results

Filter results X

All categories (32)

Instruction Manuals(30)

Catalogues and Brochures(2)

All brands

All languages

soon X

  • Drive 500 slide gate operator - Drive 600 slide gate operator (Installer Instructions)
    Nice South Africa - Instruction Manuals: Automation for gates and road barriers / Motors for sliding gates
    Drive 500 slide gate operator - Drive 600 slide gate operator (Installer Instructions)
    ...r on any input will simply result in the control card beeping to indicate the gates are being kept locked inten onally. As soon as the holiday lock-out mode is deac vated, the system will resume normal opera on. Holiday lock-out will only work in the...
    EN | pdf, 3.59 MB
  • Drive 500 slide gate operator - Drive 600 slide gate operator (User Instructions)
    Nice South Africa - Instruction Manuals: Automation for gates and road barriers / Motors for sliding gates
    Drive 500 slide gate operator - Drive 600 slide gate operator (User Instructions)
    ... on any input will simply result in the control card beeping to indicate the gates are being kept locked intentionally. As soon as the holiday lock-out mode is deactivated, the system will resume normal operation. Holiday lock-out will only work in t...
    EN | pdf, 17.39 MB
  • ET Nice Swing MCU
    Nice South Africa - Instruction Manuals: Control systems / Control units
    ET Nice Swing MCU
    ...Gates run up hard onto the end stops as they are out of reference with the last position memorized by the control card. As soon as the first gate passes the point at which it was re-engaged the control card will know it is out of reference to the gat...
    EN | pdf, 18.97 MB
    SWINGMCU
  • ET Wingo swing gate operator (Installer Instructions)
    Nice South Africa - Instruction Manuals: Automation for gates and road barriers / Motors for swing gates
    ET Wingo swing gate operator (Installer Instructions)
    ...Gates run up hard onto the end stops as they are out of reference with the last position memorized by the control card. As soon as the first gate passes the point at which it was re-engaged the control card will know it is out of reference to the gat...
    EN | pdf, 20.2 MB
  • ET Wingo swing gate operator (User Instructions)
    Nice South Africa - Instruction Manuals: Automation for gates and road barriers / Motors for swing gates
    ET Wingo swing gate operator (User Instructions)
    ...Gates run up hard onto the end stops as they are out of reference with the last position memorized by the control card. As soon as the first gate passes the point at which it was re-engaged the control card will know it is out of reference to the gat...
    EN | pdf, 9.01 MB
  • FLOR-VERY
    Nice - Instruction Manuals: Control systems / Radio controls and programmers
    FLOR-VERY
    ...ill give the first pulse and start transmitting only after half a second. In this case we advise you change the battery as soon as possible. On the other hand, if the battery is completely flat the LED will flash at half-second intervals without tran...
    EN IT FR ES DE | pdf, 302.57 KB
    FLOXMR, FLOXM220R, FLO1R, FLO2R, FLO4R, VERY
  • MD2010 Loop detector
    Nice South Africa - Instruction Manuals: Accessories / Selector switches and proximity readers
    MD2010 Loop detector
    ... Dipswitch 4 - Boost mode: If boost mode is ON the detector will immediately switch to high sensitivity once activated. As soon as the vehicle is no longer being detected the sensitivity reverts back to what has been set on dipswitch 2 and 3. This mo...
    EN | pdf, 181.2 KB
  • MINDY A924
    Nice - Instruction Manuals: Control systems / Control units
    MINDY A924
    ...ef. K, Fig. 1) to decrease speed, or press and hold down the "Open" button (ref. I, Fig 1) to increase speed 3. As soon as the speed has reached the required value, release the buttons (the new speed is automatically memorised) N.B. The adjus...
    EN IT FR ES DE PL NL | pdf, 5 MB
    AR | pdf, 1.41 MB
    Other languages
    A924
  • OVIEW
    Nice - Instruction Manuals: Control systems / Radio controls and programmers
    OVIEW
    ...s connected. Data acquisition (events log) is performed from the start, automatically and not visible to the installer, as soon as Oview is connected to the network: this searches for all devices on the network and stores the events log of each in it...
    EN IT FR ES DE PL NL | pdf, 6.1 MB
  • ROBUS 350
    Nice - Instruction Manuals: Automation for gates and road barriers / Motors for sliding gates
    ROBUS 350
    ...in possession of the necessary requisites and in full respect of the laws, provisions and standards currently in force. As soon as ROBUS350 is energized, you should check the following: 1.Make sure that the "BLUEBUS" LED flashes regularly, with a...
    EN IT FR ES DE PL NL | pdf, 1.71 MB
    ROBUS, RBKCE, RB350, RBA2, RBA2/A
1 | 2 | 3