Skip to main content
Nice

Form di ricerca

Download

soon X Control systems X

  • ET Nice Swing MCU
    Nice South Africa - Instruction Manuals: Control systems / Control units
    ET Nice Swing MCU
    ...Gates run up hard onto the end stops as they are out of reference with the last position memorized by the control card. As soon as the first gate passes the point at which it was re-engaged the control card will know it is out of reference to the gat...
    SWINGMCU
  • FLOR-VERY
    Nice - Instruction Manuals: Control systems / Radio controls and programmers
    FLOR-VERY
    ...ill give the first pulse and start transmitting only after half a second. In this case we advise you change the battery as soon as possible. On the other hand, if the battery is completely flat the LED will flash at half-second intervals without tran...
    FLOXMR, FLOXM220R, FLO1R, FLO2R, FLO4R, VERY
  • MINDY A924
    Nice - Instruction Manuals: Control systems / Control units
    MINDY A924
    ...ef. K, Fig. 1) to decrease speed, or press and hold down the "Open" button (ref. I, Fig 1) to increase speed 3. As soon as the speed has reached the required value, release the buttons (the new speed is automatically memorised) N.B. The adjus...
    A924
  • OVIEW
    Nice - Instruction Manuals: Control systems / Radio controls and programmers
    OVIEW
    ...s connected. Data acquisition (events log) is performed from the start, automatically and not visible to the installer, as soon as Oview is connected to the network: this searches for all devices on the network and stores the events log of each in it...